- You should always sand after the primer coat if you use water-based primer; it raises the soft part of the grain and you need to get this smoothed down for good results.
- You can quickly do the surface with an orbital sander, palm sander or even a sanding block; use 120 grit paper and don't over-do it.
- For beadboard use a fine grit drywall sanding sponges with the sharp angle side; it easily gets into the beads.
If you want the sponge to last, wrap a sheet of sandpaper around it and use it that way.
- You can quickly do the surface with an orbital sander, palm sander or even a sanding block; use 120 grit paper and don't over-do it.
- For beadboard use a fine grit drywall sanding sponges with the sharp angle side; it easily gets into the beads.
If you want the sponge to last, wrap a sheet of sandpaper around it and use it that way.
0 comments:
Post a Comment